International aviation newsNovember 15, 2026RSS

Air traffic and weighted load factor calculator

Combine up to three flight segments. Calculate RPK/ASK or CTK/ACTK and see why averaging percentages can give the wrong network result.

For each segment enter paying passengers and available seats, or cargo carried and available cargo capacity in tonnes. Use kilometres for distance. Leave an unused segment entirely blank. Do not mix passengers and tonnes. Your entries are sent to this site when you calculate.

Ground handlers checking pallets in an air cargo warehouse.
Segment 1
Segment 2
Segment 3
Clear values

What the calculation measures

For each segment multiply carried quantity by distance, and available capacity by the same distance. Add the traffic products, add the capacity products, then divide total traffic by total capacity and multiply by 100. Passenger units are passenger-kilometres and seat-kilometres; cargo units are tonne-kilometres. Reported carrier figures may use a different scope or distance convention.

Fictional example: 70%, not 75%

Segment 1 carries 90 people in 100 seats over 1,000 km: 90,000 RPK and 100,000 ASK, or 90%. Segment 2 carries 60 people in 100 seats over 2,000 km: 120,000 RPK and 200,000 ASK, or 60%. Combined: 210,000 / 300,000 = 70%. Averaging 90% and 60% gives 75%, which ignores the second segment’s greater weight.

Choose comparable inputs

Enter one flight segment per row and a consistent passenger or cargo definition. A connecting traveller appears in each segment travelled: adding segment counts does not count unique travellers. Cargo capacity is the usable capacity for that segment, not automatically the aircraft’s published maximum payload. The result does not calculate revenue, profit, fuel or emissions. Decimal output is rounded for display.

IATA · Understanding Air Traffic Metrics ↗

Practical reading